Revealed in 2007 at the Pebble Beach Concours d’Elegance , the Aston Martin DBS is by far one of the most beautiful cars out there. With an unique design and pure performance, the supercar was designed to fill the gap between road and track.
According to Aston Martin Chief Executive Officer, Dr Ulrich Bez, said: “The DBS is the ultimate expression of Aston Martin’s engineering and technical ability. It offers pure performance without compromise.
Featuring flowing curves, complex surfaces and an unrivaled sculptural beauty, the DBS is a classic Aston Martin in its every inch, but in the same time its aerodynamic excellence and impressive performances are the characteristics of a modern sports car.
When creating the DBS, Aston Martin focused on achieving the right balance between strength and mass, reason why, like DB9 and the DBR9 and DBRS9 race cars it is built on the VH (Vertical Horizontal) architecture. Thanks to this structure, the weight is being kept to a minimum, and with the front-mid mounted engine and rear-mid mounted transaxle the company obtained a near perfect weight distribution: 85%.
Under the hood there is a hand-built V12 engine producing a total of 510 hp at 6500 rpm. The 3.71:1 final-drive ratio ensures that the additional power is usable, enhancing in-gear acceleration in particular. The car’s performance figures are more than impressive: a top speed of 191mph (302km/h) and a 0-62mph (0-100km/h) time of 4.3 seconds.
A combination of elegant design, innovative manufacturing processes, race-derived materials and components and Aston Martin’s unrivaled hand-build expertise makes the DBS a luxury sports car without equal. The price for the DBS starts at $269,000, but it remains a car with no competitor.
The need for high-performance stability, handling ability and low kerb weight defined the DBS’s form and construction. Accordingly, the DBS becomes the first production Aston Martin to make extensive use of ultra-light carbon-fibre body panels. High levels of performance and control are delivered by the combination of inherent light weight, near-perfect weight distribution, a supremely powerful and flexible V12 engine, and a performance-honed six-speed transmission, together with new carbon ceramic brakes and an adaptive damper controlled suspension system.
At the heart of the DBS is a 6.0-litre V12 engine. The DBR9 and DBRS9 race cars are powered by an enhanced version of this same V12, tuned to produce in excess of 600bhp. The shared powerplant continues the strong link between Aston Martin’s road and race cars, just as the six-cylinder engine used in the DBR1 inspired a generation of engines in the DB4, DB5 and DB6 in the 1950s and 60s.
As with all current Aston Martins, the engine is hand-assembled at Aston Martin’s dedicated engine facility in Cologne, Germany. The classic 6.0-litre V12 features a number of power-increasing enhancements. These include a ‘by-pass’ engine air intake port that opens above 5500rpm to allow more air into the engine, and re-profiled air inlet ports that further improve airflow into the combustion chamber. Combined with a compression ratio of 10.9:1, the result of these enhancements is prodigious power and torque: the DBS delivers 380 kW (510 bhp/517 PS) at 6500 rpm. The 3.71:1 final-drive ratio ensures that the additional power is usable, enhancing in-gear acceleration in particular.
A lightweight, rigid structure is the design engineer’s ultimate goal, and achieving the right balance between strength and mass is crucial. Like the DB9 and its sibling DBR9 and DBRS9 race cars, the DBS uses Aston Martin’s class-leading all-alloy VH (Vertical Horizontal) architecture, a lightweight bonded aluminium structure that provides outstanding strength and rigidity. Aston Martin’s engineers have also employed advanced materials and processes to further reduce weight and increase the DBS’s performance and dynamics.
Carbon-fibre panels are used for the boot enclosure, boot lid, door opening surrounds, front wings and bonnet, giving a saving of some 30kg over more conventional materials without any reduction in strength. “There are no restrictions on form or shape in using carbon-fibre,” says Marek Reichman, Aston Martin’s Design Director, “and the material allowed us to wrap bodywork around the 20" wheels and maintain the precise relationship between the wheel and the bodywork.”
Each panel has been carefully sculpted to direct the airflow around the car, into the engine and to help cool the braking system. The carbon-fibre elements are produced using advanced manufacturing techniques developed from the aerospace and motorsport industries.
The new panel-making procedure also delivers an industry-best surface finish, thanks to a patented ‘Surface Veil’ process. The application of a 200 micron layer of epoxy and glass to the panel delivers a class-A surface that is in line with Aston Martin’s tradition of high-quality finishes. Inside the car, the weave patterns on the exposed carbon-fibre elements have been carefully selected to present the most harmonious surfaces.
As with the DB9 and DBR race cars, the Aston Martin DBS benefits from the inherent characteristics of the VH architecture. The VH underframe consists of pressed, extruded and cast aluminium components, bonded together to create an immensely strong underlying structure.
This structure means that weight is kept to a minimum, with the front-mid mounted engine and rear-mid mounted transaxle ensuring a near perfect weight distribution: 85% of the car’s weight is positioned within its wheelbase. The DBS’s polar moment of inertia is therefore very low, producing a car with natural agility, a strong, stable platform for the V12’s high power output and an exhilarating driving experience.
To take full advantage of its extremely precise and rigid platform, the DBS employs a new and sophisticated Adaptive Damping System (ADS) which uses two separate valves to set the dampers to five different positions, allowing instant adjustment of the car’s ride and handling characteristics. The ADS automatically alters the suspension settings to ensure the driver has high levels of control at all times, with the ability to respond instantly to different driving conditions. The dampers can be ‘softer’, with a corresponding improvement in ride quality, or ‘firm’, providing improved body control for more spirited driving.
The damper settings are determined by an electronic control unit which takes sensor readings from the car’s systems, including throttle position, brake position, steering wheel rotation and vehicle speed. This data establishes the prevailing driving conditions and the demands the driver is making on the car.
The DBS’s Adaptive Damping System perfectly captures the car’s sporting character, ensuring that stiffer dampers are available for better handling and control when the car is being driven enthusiastically, without compromising ride comfort during ‘normal’ driving conditions. A designated ‘Track’ mode automatically sets all dampers to their firmest positions, making it ideal for circuit driving. The DBS is fitted with Pirelli P-Zero tyres that have been developed especially for the car, along with new 20" lightweight alloy wheels.
The DBS also has a revised Dynamic Stability Control (DSC) system, designed to help maintain maximum traction in challenging driving conditions. In default operation, the DSC is automatically on. Select and press the button for two seconds and DSC ‘Track’ mode is engaged, raising the threshold at which the system intervenes to allow the experienced driver to explore the car’s limits. Hold the button for four seconds and DSC is disengaged entirely.
The car’s braking system features another innovation, the first time Carbon Ceramic Matrix (CCM) brakes have been used on a road-going Aston Martin. The end result is shorter stopping distances with excellent resistance to fade in even the most demanding driving conditions. CCM brakes are also some 12.5kg lighter than a conventional system, reducing the weight of the car overall and, in particular, the unsprung weight and rotational masses, further enhancing the performance of the suspension.
The DBS is manufactured using the finest materials, with a combination of hand-finishing and pioneering high-technology processes. From the exceptional quality of the design and finish to the advanced production techniques employed to save weight and create strength, the DBS is both a technological masterpiece and a powerful visual and tactile experience, inside and out.
The DBS is the culmination of the DB bloodline, a synthesis of race-bred technology and road-going practicality that can be traced back to the iconic DB2, DB3S and DB4GT, and is continued today with the DBR9 and DBRS9 race cars. The DBS’s powerful, flowing form fuses the visual language of the DBR9 GT1 race car with the innate elegance of the DB series. Lower and tauter than other Aston Martin production models, the DBS has subtly flared wheel arches accommodating standard 20" diameter wheels and tyres. These provide excellent stability and grip, while giving the car a muscular and athletic stance that evokes the DBR9 and DBRS9. The design process involved continuous revision and honing of the DBS’s surfaces, ensuring that the shapes and forms represent perfectly the car’s inherent power, while never diluting the fundamental proportions that are the essence of every Aston Martin.
The external detailing reflects the power and dynamic abilities of the DBS, with revised inlets and enlarged grilles that deliver more air into the engine and increase its cooling capacity. Subtle design details include a new five-bar design for the polished alloy main grille, as well as two additional vents in the enlarged power bulge on the carbon-fibre bonnet. These vents are entirely functional, improving engine performance and efficiency, yet also communicating the increased power output of the uprated V12 engine.
The DBS’s aerodynamic enhancements are shaped by Aston Martin’s racing experience. A carbon-fibre splitter and a new front bumper design help channel airflow around the car’s wider bodywork. The aerodynamics team worked hand in hand with the modelling team to ensure that the forms and surfaces of DBS were sculpted for inherent stability at high speeds.
The widened front and rear track improve handling and give the car a more muscular character. To accommodate this additional width, the surfaces of the wings have been sculpted and re-shaped with harder lines, which also serve to emphasise the car’s strength and power. The lowered ride height is accentuated by the enhanced side sills, carefully profiled to improve aerodynamic performance and reduce drag along the flanks. The iconic Aston Martin side strake, a design feature of every DB car since the DB4, has been redesigned for the DBS, incorporating a side repeater formed by a bank of LEDs.
Improved aerodynamics shape the rear of the DBS, where the more prominent boot spoiler is carefully incorporated into the carbon-fibre boot lid. A horizontal chrome finisher is set into the lid to accentuate the wide track of the new car. The car’s flat undertray helps to improve the aerodynamics of the underbody surface and culminates in a new carbon-fibre rear diffuser, another feature carried over from the race cars. This device creates an area of low pressure beneath the rear of the car, reducing lift and improving high-speed stability without the need for large, unsightly external spoilers. The new one-piece diffuser also incorporates the DBS’s large and distinctive twin exhaust tailpipes.
The interior of the DBS represents the epitome of Aston Martin’s commitment to using materials honestly, without disguise or embellishment. Lightweight materials are used throughout to save weight; door pulls are made from carbon-fibre, for example, and the carpet has been woven with lighter fibres to save valuable kilograms. Special semi-aniline leather is used throughout the cabin, saving weight as well as giving a soft feel and distinctive aroma.
The DBS features unique primary controls, including a new steering wheel profile with a twin-stitched detail marker that indicates the ‘on-centre’ position. The gear knob is fashioned from polished alloy to echo the metallic finishes on the new centre console. The instrument cluster is designed with white numerals on a dark graphite background for excellent legibility. The twin-stitch pattern runs through the interior as a signature device; the alignment of both stitch lines is testament to Aston Martin’s ongoing tradition of exceptional craftsmanship.
The DBS start sequence blends tradition with high technology and a touch of theatre. The ignition ECU (Emotion Control Unit) has evolved into a machined and highly tactile polished glass ECU, incorporating a stainless steel inner case. Resembling a fine wristwatch or a piece of contemporary sculptural jewellery, this glass ECU epitomises the spirit of the DBS.
To operate the car, the glass ECU is inserted into a special docking station in Aston Martin’s signature dashboard-mounted glass starter button, and glows red to indicate when the car is ready to start. The engine is fired by pressing the ECU flush with the surface of the starter button. After pressing to stop the engine, the ECU automatically motors out of the dashboard for removal.
The start sequence of the DBS is augmented by an all-new centre console design with a cast metal surround, crisp typography and new graphics. The new console has a traditional dial-face clock at the centre, flanked by two rotary controls for the heating and air-conditioning system, fashioned from solid, turned aluminium.
These controls are also used to navigate the audio system, Bluetooth telephone preparation and satellite navigation functions. The Aston Martin 700 W Audio System, with Dolby® Pro Logic II® has been exclusively developed for Aston Martin to provide outstanding sound quality. A slot for the six-CD autochanger is located at the top of the console, while within the centre armrest cubby box there is inbuilt connectivity for MP3 players. Bluetooth telephone preparation is standard on the DBS, enabling you to synchronise your mobile telephone directory through the car’s display screens. It can also display the last 10 calls received, made and missed.
Introduced as an alternative to the standard six-speed manual gearbox, DBS customers will now be afforded the option of the ‘Touchtronic 2’ six-speed automatic transmission. Derived from the same ZF transaxle unit that was developed for the DB9, the system has been substantially re-engineered to accommodate the power and performance characteristics of the DBS.
The DBS Touchtronic transmission features a final drive ratio shortened from 3.15:1 to 3.46:1, aiding quicker acceleration times and an improved performance feel. Additionally, changes to the gearbox calibration aid more aggressive gear shifts and greater usability, while retaining the performance potential of the manual gear box – matching the 0-60mph (0-100km/h) time of 4.3 seconds. System functionality is consistent with that on the DB9, with ‘Park’, ‘Reverse’, ‘Neutral’ and ‘Drive’ modes selected via facia mounted controls.
When in ‘Drive’ mode, pulling either of the leather-trimmed magnesium alloy paddles mounted on the steering column will activate Touchtronic mode, enabling the driver to control gear shifts via the paddles. Touchtronic mode is also accessible directly on engine start-up. Alternatively, the ‘Drive’ mode can be selected at any time by pressing the ‘D’ control on the centre console, engaging a fully automatic mode which will select the most appropriate gear for the speed and driving conditions automatically.
The system also includes a ‘Sport’ mode - activated by a button on the centre console – which engages a more aggressive gear shift strategy as gear changes feel sharper and more forceful, engine speed matching on downshifts is more aggressive and in full automatic mode, upshifts occur at higher speeds. The Sport setting also incorporates a more responsive throttle map to match the high-performance characteristics of the DBS.
The DBS will now also benefit from the installation of a new Bang & Olufsen BeoSound system – developed specifically for the DBS – as standard equipment. The BeoSound DBS system produces a total power output of 1000w, delivering the sound image through a total of 13 channels across 10 speaker locations. Adopting new speaker grille designs throughout the car and acoustic lenses which rise out of the facia, the system offers customers an unrivalled audio experience.
After evaluating customer feedback the DBS will now also be offered with an optional 2+2 seating configuration, where the rear storage areas are replaced with two seats. A 2+0 arrangement – where two storage areas populate the rear environment – remains standard.
Also introduced to the DBS is the option of a new ten-spoke 20’’ forged aluminium wheel with diamond-turned surface – available in either silver or graphite finishes. The optional wheel delivers a total unsprung mass reduction of 8kg versus the standard cast wheel, aiding enhanced handling and improved acceleration and braking performance.
|5.9 Auto Coupe||$273,000|
|Delete Model Badging||N/A|
|Garage Door Opener||$295|
|First Aid Kit||$145|
|Fascia Trim Piano Black||$1.595|
|Carpet Color - Contemporany||$450|
|Contrast Carpet Binding||$220|
|Headlining Color - Contemporany||$450|
|Leather COlor-Out of range/ match to Samp||$4.545|
|Leather Color Contemporany||$750|
|Paint - Contemporany||$750|
|Personalized Sill Plaques||$295|
|Polished Alloy Treadplates||$450|
|Steering Wheel - 12 O’clock Stitch||N/A|
|Paint - Other Manufacturer’s Color||$2.805|
|Paint - Other Manufacturer’s Special Color||$3.785|
|Paint - Previous AML Color||$1.895|
|Paint - Special AML COlor/Match to Sampl||$3.785|
|2+2 Seating arrangement||$3.785|
|20" 10-Spoke Graphite Diamond Turned Wheels||$3.785|
|20" 10-Spoke Silver Diamond Turned Wheels||$3.190|
|Standard Wheel Graphite Color||$750|
This is an article about the model Aston Martin DBS V12
Can you have a supercar too far? Not according to Aston Martin. The good folk of Gaydon aren't afraid to fill each and every niche with sports and supercars of every persuasion and nuance. They'll do you a V8 in open or closed form, oriented to comfort or slinging around the Nurburgring. They'll even do a V8 with a V12, if you see what we mean. So it's no surprise that they're no...
Not even James Bond has driven the Aston Martin DBS Touchtronic yet. Quantum of Solace is just about to open but Daniel Craig must content himself with the standard manual DBS. We’ve already driven his likely next car: the DBS Touchtronic with an automatic gearbox, a new Bang and Olufsen sound system and gorgeous new optional wheels. Read our full review here...
An auto? Isn’t t...
2008 Aston Martin DBS First steer
“The DBS is a luxury GT, but it feels quicker off the line than Lamborghini’s Gallardo Superleggera”
Our sole purpose of going to England was to be the first Australian media outlet to drive the no nonsense, hard-core, Aston Martin DBS. You’ll more than likely know this car, as James Bond’s British Secret Service company car, in the last Bond Film.
It also happ...
Two-Car Libido Enhancer: What you get for $266,350 or $385,419 are babe magnets, but minus the whole point: the back seats.
Should you get on Jeopardy! here’s the likely question to the answer, “A very popular video game about racing”: What is Gran Turismo? Well, that’s one answer.
Gran turismo (or grand touring) is a term cooked up by car-crazy Italians ages ago to describe an automobile tha...
The Aston Martin DBS is one of those achingly beautiful Aston flagship cars that will always find a ready used market. Will it be a classic model? Probably not. The DBS replaced the Vanquish and it was replaced by the Vanquish, which, in a nutshell, identifies where its manufacturer's allegiances lay. If the DBS was indeed marking time, it did so very successfully and there are many who prefer the...
An extremely unique bright yellow Aston Martin DBS was sold by Global Auto Sports via the Bentley Downers Grove dealership and is without doubt one of, if not the most bespoke Aston Martin DBS ever to leave Aston’s factory.
German Luxury Tuner DMC has introduced the DMC Fakhuna, a concept design for the Aston Martin DBS. The official release follows after a series of teaser pictures.
Most significant change is an aggressive new front bumper fascia, which is equipped with larger air-intakes and a spoiler lip. Between the front and rear side, side skirt attachments render a lowered and more stretched look.
In order t...
It's nigh impossible to write the words "Aston Martin" without the name of a famous secret agent spurting out uncontrollably in the very next sentence. That perfect symbiosis is ingrained in the mind and becomes almost impossible to skirt when our host for the day speaks in near-perfect clipped English with just the mildest hint of a German accent. That man is Max Loder, who at 26 years old is luc...
Speed of sound
Bang & Olufsen BeoSound for Aston Martin has been developed exclusively for the Aston Martin models, acoustically and physically matched to the cars. While the visual aluminium elements match seamlessly with the dynamic lines and curves of the vehicles, the sound performance has been designed to the exact dimensions of the interior.This ensures the listener is enveloped and eng...
Auto gearbox helps range-topping Aston find its true identity
Cool car, the DBS. It just doesn’t know what it wants to be. Well, that’s not strictly true. It wants to be a 599 GTB, but its lazier V12 and DB9 architecture don’t allow it to pull off the hardcore front-engined sports car thing quite so well.It’s safe to say that adding an automatic gearbox won’t change that, but it might give the DB...
Carbon fibre bonnet, front wings, doors. Carbon fibre front splitter. Carbon fibre rear diffuser. Carbon-ceramic brakes. Carbon fibre propshaft. Dammit, even carbon fibre door pulls. How much more 'carbon' can you make the Aston Martin DBS?
By calling it Carbon Edition and giving it carbon fibre door mirrors and rear lens inlay panels, a carbon weave centre console finish and 'Carbon' kickplates...
The Aston Martin DBS V12 is a high performance GT sports car from the UK manufacturer Aston Martin. Aston has used the DBS name once before on their 1967-72 grand tourer coupe. The modern car replaces the 2004 Aston Martin Vanquish S as the flagship of the marque. It was officially unveiled at the 2007 Pebble Beach Concours d'Elegance on 2007-08-16 and delivery began on 2008 Q1.
The DBS was first...
Aston Martin will premiere the DBS Volante at the Geneva Auto Salon on the 3rd March 2009. Completing the DBS line-up, the new Volante will afford customers the combination of the DBS's already-established benchmark sports car characteristics with all the thrills of open-air motoring.
Broadening the DBS's character, the DBS Volante will appeal to drivers who wish to combine the excitement of driv...
Aston Martin will unveiled one of the most eagerly anticipated cars of the year when the new DBS is revealed at the Pebble Beach Concours d'Elegance on August 16th, where the company took a starring role as the featured marque. Aston Martin Chief Executive Officer, Dr Ulrich Bez, said: "The DBS is the ultimate expression of Aston Martin's engineering and technical ability. It offers pure performan...
DBS V12 for 007, A Quantum of Solace
'A Quantum of Solace' spec for James Bond 007 (2008)
Following the reception given for the DBS in Casino Royale, 007 was subsequently re-united with the DBS for the 22nd Bond film, Quantum of Solace, released at the end of October 2008. Four cars with chassis numbers from E00038 to E00041 were specially supplied just for the special effects, with further...
Aston Martin DBS
On the 16th of January 2006, Aston Martin released very limited details of a new top of the range sportscar. Very little was said about the new DBS at that time except that it will be driven by James Bond 007 in the forthcoming film Casino Royale scheduled for release in the November of the same year. The new James Bond actor, Daniel Craig, had visited the AM Gaydon factory o...
Engine: 5.935 cc 48-valve V12
Transmission: 6-Speed Manual (optional 6-Speed Automatic)
Drivetrain: RWD (Rear Wheel Drive)
Kerb Weight: 1,695 kg (3,737 lb)
City fuel economy: 12 mpg-US (20 L/100 km; 14 mpg-imp)
Highway fuel economy: 18 mpg-US (13 L/100 km; 22 mpg-imp)
Horsepower: 510 hp (380 kW; 517 PS) at 6500 rpm
Torque: 420 lb·ft (569 N·m) at 5750 rpm
Wheelbase: 107.9 in (2,741 mm)